Rear windshield review
Close
Login to Your Account
Yamaha Viking Forum

Rear windshield review

This is a discussion on Rear windshield review within the Viking General Discussion forums, part of the Yamaha Viking Forums category; Hi Just installed my superatv rear windshield so I haven't much time to do a good review but this it what I noticed so far ...

Results 1 to 6 of 6

Thread: Rear windshield review

  1. #1
    Junior Member NLviking's Avatar
    Member #
    9307
    Join Date
    Nov 2019
    Posts
    18

    Rear windshield review

    Hi

    Just installed my superatv rear windshield so I haven't much time to do a good review but this it what I noticed so far
    fits good pretty easy to install.bit tight against the box on the bottom.
    Box dumps but it rubs the bottom couple of inches of the window when closing.
    Seems a bit quieter in the cab but could just be in my mind only drove it 1000yrds after install.
    A little buzzing vibration when driving likely where it contacts the dump box..if there were a couple clamps down low to secure it might fix the buzz.
    Attached Images Attached Images  

  2. #2
    Junior Member NLviking's Avatar
    Member #
    9307
    Join Date
    Nov 2019
    Posts
    18
    Good visibility from inside and
    Here you can see where it contacts the box
    Attached Images Attached Images    

  3. #3
    Junior Member 300bee's Avatar
    Member #
    9033
    Join Date
    Feb 2019
    Posts
    9
    Do you think the contract with the box will eventually damage the windshield?
    When you get a chance to drive some I would be interested in an up date.
    Dust control etc.
    Thanks for posting the pics.


    Sent from my iPhone using Tapatalk

  4. Remove Advertisements
    VikingForum.net
    Advertisements
     

  5. #4
    Junior Member NLviking's Avatar
    Member #
    9307
    Join Date
    Nov 2019
    Posts
    18
    Time will tell I guess. I was thinking about drilling a couple holes in it near the middle at the bottom and putting a couple cable ties around the bars to pull it away the bed.
    I stopped the "buzzing"i had a little piece of the rubber seal left over so I put it on the top where it made contact with the roof. I'll get a longer piece and run it the entire length of the top of the windsheild.

  6. #5
    Junior Member Viking vi Camo's Avatar
    Member #
    1506
    Join Date
    Jun 2015
    Location
    New Mexico
    Posts
    6
    Looks awesome, I have mine in the cart as I write this. Thanks for sharing!

    Quote Originally Posted by NLviking View Post
    Hi

    Just installed my superatv rear windshield so I haven't much time to do a good review but this it what I noticed so far
    fits good pretty easy to install.bit tight against the box on the bottom.
    Box dumps but it rubs the bottom couple of inches of the window when closing.
    Seems a bit quieter in the cab but could just be in my mind only drove it 1000yrds after install.
    A little buzzing vibration when driving likely where it contacts the dump box..if there were a couple clamps down low to secure it might fix the buzz.
    Quote Originally Posted by NLviking View Post
    Good visibility from inside and
    Here you can see where it contacts the box

  7. #6
    Junior Member mikewheel's Avatar
    Member #
    9247
    Join Date
    Sep 2019
    Posts
    2
    The only thing that contacts the box on mine is the rubber seal at bottom. I have the OEM top and had to relocate the brackets at rear of top to get in proper place.

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •