Yamaha Viking Forum banner

Best Viking sound system

14135 Views 18 Replies 12 Participants Last post by  Ironhide.au
Just wondering your thoughts on the best sound system for the Viking.
I like the Yamaha one but its pricy.
Courious if there are any options that are up to par.
1 - 19 of 19 Posts
I have a Wet Sounds Stealth 6 (200watt) Sound Bar with a Bazooka 8" Subwoofer Bass tube (250watt). Love it. Great volume, phat bass, bluetooth, easy install (wet sounds). If you wanted to go over the top for some stadium sounds, go for the Stealth 10 with 2 x 8" Bazooka 1 active 1 passive. If your into hosting street parties. Cheers


Sent from my iPhone using Tapatalk
I am building my own out of pvc pipe with a marine amp and speakers I saw on YouTube not done yet but I will let ya know

This is what I have in my viking
It was a bday present from the wife
The only thing it's missing is rattle your teeth bass

I can hear it just fine at 45 mph running down the road though

For $109 it's not bad
It's made for a motorcycle
See less See more
I have a Wet Sounds Stealth 6 (200watt) Sound Bar with a Bazooka 8" Subwoofer Bass tube (250watt). Love it. Great volume, phat bass, bluetooth, easy install (wet sounds). If you wanted to go over the top for some stadium sounds, go for the Stealth 10 with 2 x 8" Bazooka 1 active 1 passive. If your into hosting street parties. Cheers


Sent from my iPhone using Tapatalk
Hey Ironhide.au do u have pics of your sound system with that bazooka tube placement?
Iron hide, where did you mount the bazooka tube and how does it connect to the sound bar? Thanks
Hey Ironhide.au do u have pics of your sound system with that bazooka tube placement?
Will post some when I get home today. Wetsounds clamps to front roll bar, Bazooka strapped to centre roll bar pulled back into roof. Cheers


Sent from my iPhone using Tapatalk
Iron hide, where did you mount the bazooka tube and how does it connect to the sound bar? Thanks
Bazooka mounted in the middle of cab from centre roll bar pulled back, connects from low level 3.5mm output from Wetsounds wiring loom into Bazooka (3.5mm split into 2x RCA) Wetsounds install - connect black and red wire to battery, has aux 3.5mm input and 3.5mm output. Cheers


Sent from my iPhone using Tapatalk
See less See more
2
  • Like
Reactions: 1
Trunk Bumper Gadget Automotive exterior Audio equipment
Vehicle Hood Motor vehicle Automotive tire Automotive mirror

built my own.. simple.. and cost about $100 when it was all said and one
See less See more
2
  • Like
Reactions: 2
View attachment 1658 View attachment 1659
built my own.. simple.. and cost about $100 when it was all said and one
Nice one. Good to have skills. Cheers


Sent from my iPhone using Tapatalk
  • Like
Reactions: 1
My bose soundlink mini just ain't cutting it haha well if your moving at least.
Wheel Tire Vehicle Car Automotive tire


I originally had the ssv works overhead but i recently put a pyle marine amp in the glove box and put 2 wakeboard tower speakers on and also gutted the ssv works radio out and running those 2 speakers with the 2 8's off the amp. Works good for me
See less See more
  • Like
Reactions: 1
[video=vimeo;132295791]https://vimeo.com/132295791[/video]


Sent from my iPhone using Tapatalk
  • Like
Reactions: 1
how did you suspend it from the roll bar? I think I'm gonna try your setup. I'm guessing its a marine system?
how did you suspend it from the roll bar? I think I'm gonna try your setup. I'm guessing its a marine system?



Sent from my iPhone using Tapatalk
See less See more
2
1 - 19 of 19 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top