Yamaha Viking Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
(Jacked up) when I spin my front driver side wheel I get a clicking sound. I was hoping it was a CV joint so i removed & installed a new axle assembly. The clicking noise is still there and actually a little worse when I spin it by hand.

The passenger side is as quiet as a mouse when i spin it by hand.

The sound is definitely coming from the front diff. it almost feels like the spline on the axle end is slipping in the differential gear?

I feel like the new axle is going in all the way.

Any suggestions or ideas?

Thanks for any help.
 

·
Registered
Joined
·
6 Posts
Discussion Starter · #2 ·
(Jacked up) when I spin my front driver side wheel I get a clicking sound. I was hoping it was a CV joint so i removed & installed a new axle assembly. The clicking noise is still there and actually a little worse when I spin it by hand.

The passenger side is as quiet as a mouse when i spin it by hand.

The sound is definitely coming from the front diff. it almost feels like the spline on the axle end is slipping in the differential gear?

I feel like the new axle is going in all the way.

Any suggestions or ideas?

Thanks for any help.
I FOUND MY OWN ANSWER WHEW!!
See the link Front hub chatter

COMPLETLEY NORMAL for passenger side to spin quiet and driver side to sound clunky in front diff.
I hope this helps the next guy.
 
1 - 2 of 2 Posts
Top