Yamaha Viking Forum banner
1 - 9 of 9 Posts

·
Registered
Joined
·
28 Posts
Discussion Starter · #1 ·
Does anyone know of inner fenders for our Vikings? I don't like how the front is wide open to allow crud to get up under the dash.:eek:ccasion14:
 

·
Registered
Joined
·
54 Posts
Made some Parthenon's out of light aluminum sheet from home depot and has been working really good. need to be care full when power spraying not to spray over the aluminum sheets I installed.
 

·
Registered
Joined
·
28 Posts
Discussion Starter · #4 · (Edited)
Made some Parthenon's out of light aluminum sheet from home depot and has been working really good. need to be care full when power spraying not to spray over the aluminum sheets I installed.
RONN, You got any photos by chance? I thought maybe I might give it a shot. Thanks.
 

·
Registered
Joined
·
54 Posts
can't get the pic's to upload . home depot has a roll of light sheet aluminum about 8" wide and 10" long, I pushed the aluminum in the crack of the lower plastic part of the finder and the aluminum will fallow the crack, push it down and put some sealant in the crack. it is working really well for me.
 

·
Registered
Joined
·
28 Posts
Discussion Starter · #6 ·
That sounds good. I'll give it a try. Thanks for the info.
 
1 - 9 of 9 Posts
Top