[Z71hamric]

Just curious as to what everybody has done prolly gonna do some 18g greaseless weights 2mm shim (until i can afford a jbs sheave) and a gold or white secondary spring

 

[Elite Archer]

Just ordered mine from jbs today!! Can't wait to try it out!! I'm from Lonoke myself

 

[Z71hamric]

Haha no s**t lol where do you ride at

 

[Z71hamric]

Are you getting just the sheave or the whole kit and what all have you done to it

 

[Elite Archer]

Mostly just been using at the deer lease so far but we're headed to Hillarosa in couple of weeks. That's the reason I broke down an ordered from jbs!! I got sheave with 16 gram sliders & slug kit. I probably end with 15grams once I get the cdi box.. Like Rob has on the green machine. I've also got it snorkeled, 2"HL lift & 29.5" outlaw2s.

 

[BadM0nkey]

Just curious as to what everybody has done prolly gonna do some 18g greaseless weights 2mm shim (until i can afford a jbs sheave) and a gold or white secondary spring

I think you can get a Hunterworks Sheave almost free on another thread.

 

[pa.hunter]

Just curious as to what everybody has done prolly gonna do some 18g greaseless weights 2mm shim (until i can afford a jbs sheave) and a gold or white secondary spring

2mm shim? whats that?

 

[Robleticia]

Elite, do you have the sound dampening kit with the snorkels?

 

[wharvester]

Certainly not trying to hijack your thread, but I have a similar question... I'm ordering 30 inch Zillas for 14 inch wheels, 2 inch lift. Good thing about the Zillas is they are extremely light weight (26lbs and 31lbs for the 30x9x14 and 30x11x14 respectively). Ive been reading a lot about clutch stuff... obviously the JBS is the end all, be all, but money is a little tight. Is there another cheaper option anyone think? I do mostly trail (slow speed, 20ish mph) riding, along with light mud and some creek / water (maybe 2 feet) from time to time. How's the EPI kit with the secondary spring and shims? In my Grizzly 700 with 30's, I ran the white EPI spring and shims, and that was it and it was great.

 

[BadM0nkey]

Certainly not trying to hijack your thread, but I have a similar question... I'm ordering 30 inch Zillas for 14 inch wheels, 2 inch lift. Good thing about the Zillas is they are extremely light weight (26lbs and 31lbs for the 30x9x14 and 30x11x14 respectively). Ive been reading a lot about clutch stuff... obviously the JBS is the end all, be all, but money is a little tight. Is there another cheaper option anyone think? I do mostly trail (slow speed, 20ish mph) riding, along with light mud and some creek / water (maybe 2 feet) from time to time. How's the EPI kit with the secondary spring and shims? In my Grizzly 700 with 30's, I ran the white EPI spring and shims, and that was it and it was great.

The weight of 30" Zillas is less than a lot of other, much smaller tires. I have 28x10x12 fronts and 28x12x12 rears and so far have not had any problems. I plowed all winter long with these tires. I do go everywhere in Low though, but that does not seem to be a problem at the speeds I travel which is 25 or less.

 

[Robleticia]

Certainly not trying to hijack your thread, but I have a similar question... I'm ordering 30 inch Zillas for 14 inch wheels, 2 inch lift. Good thing about the Zillas is they are extremely light weight (26lbs and 31lbs for the 30x9x14 and 30x11x14 respectively). Ive been reading a lot about clutch stuff... obviously the JBS is the end all, be all, but money is a little tight. Is there another cheaper option anyone think? I do mostly trail (slow speed, 20ish mph) riding, along with light mud and some creek / water (maybe 2 feet) from time to time. How's the EPI kit with the secondary spring and shims? In my Grizzly 700 with 30's, I ran the white EPI spring and shims, and that was it and it was great.

Slug your wet clutch. about $50

 

[wharvester]

Ok, I've read about that too, so that definitely seems like a good place to start. Thanks yall.

 

[Z71hamric]

well just ordered the epi white secondary spring and a 2.2 mm shim kit for the clutches will hopefully be doing this next weekend

 

[Elite Archer]

Rob, I don't have the sound kit but plan to do it. I'm sure there will a little modifying but nothing to bad. I put the jbs sheave kit & slugs in. It's pretty freaking sweet!!! Went with 16grams until I can get the cdi box. Can't imagine having much more than I do now but definitely gonna try it!! I'm pulling these 29.5 outlaw 2s with ease now & gained about 9mph back!! 51 top speed!!!! JBS great stuff!!!

 

[wharvester]

We put the sound dampening kit on my brothers Viking with his snorkels... It wasn't bad at all yo modify a bit. Nothing an angle grinder won't handle quickly. It's a pretty easy cut right along a seam.

 

[Elite Archer]

One more day til Hillarosa Atv!! Can't wait to try out all the new mods I've done!