Yamaha Viking Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
28 Posts
Discussion Starter · #1 ·
Im about to buy a winch for my viking. This is my first install. Do i need anything other than the winch and mounting plate? I am getting a superwinch terra 35.
 

·
Premium Member
Joined
·
571 Posts
That's it, should come with everything you need


Sent from my iPhone using Off-Road Forums
 

·
Premium Member
Joined
·
571 Posts

·
Registered
Joined
·
28 Posts
Discussion Starter · #7 ·
I ended up getting a terra 45 superwinch. It won't fit the mounting plate. The plate is suppose to work for winches up to 5000lbs.
What plate did you use?
 

·
Banned
Joined
·
60 Posts
I ended up getting a terra 45 superwinch. It won't fit the mounting plate. The plate is suppose to work for winches up to 5000lbs.
What plate did you use?
I used the yahama plate for the viking but I also have a terra 45 and had to mark and drill new holes. It was not to bad of a job I turned winch over and made template of bottom of winch with piece of paper and layed it on plate which was mounted to viking and marked holes on plate. I then set winch in place to see f it would work, had to move hole marks slightly to get where I wanted. Then I drilled and installed the winch.
 

·
Registered
Joined
·
28 Posts
Discussion Starter · #9 ·
Thanks Mello,
I got it fixed.
 
1 - 9 of 9 Posts
Top